Sewing machines use two threads - the top thread that comes from a spool or reel and the bottom thread from the bobbin. When your bobbin thread runs out you have to stop sewing to replace the bobbin. If you don't have any bobbins filled you'll have to set your machine up to wind the bobbin, then rethread your machine before you can get back to stitching.
You can quit wasting time by having pre-wound bobbins on hand. Not only will you not have the nuisance of having to wind a bobbin when you're in the middle of stitching but since pre-wound bobbins are wound by high tech machines which provide a smooth, uniform wind you're less likely to run into problems with your bobbin thread. Pre-wound bobbins generally hold muc more thread then a bobbin you wind yourself, and that also means you’ll have to stop less to change bobbins.
Some machines seem to work better with the cardboard-sided bobbins because the cardboard sides provide more friction but if the bobbin fit is too snug to rotate freely, remove the cardboard, as it won’t affect the function of the bobbin. If backlash is a problem you may want to try Magic Genie Bobbin Washers.
Whether you use pre-wound bobbins or wind your own you should keep in mind that it's important to choose a quality thread. Bargin bin threads may be inexpensive but are of poor quality and will cost you in frustration.
Check this video out for more information on bobbin thread from Superior Threads.
Comments